{pboot:sort scode=4}

summary:

It consists of an air filter, a fluidized bed main unit, a cyclone separator, a bag filter, a high-pressure centrifugal fan, and an operation console. Due to the different properties of dry materials; When supporting dust removal equipment; Can be carried out as needed; Both cyclone separator and bag filter can be selected simultaneously; You can also choose one of them. Generally speaking; For materials with a higher specific gravity, only the cyclone separator needs to be selected. Materials with lighter specific gravity need to be matched with bag filters; And there is a pneumatic feeding device available for selection.

Principle:

Clean hot air is distributed into the bed through the valve plate; The wet material entering from the feeder is boiled by hot air. Due to the extensive contact between hot air and materials; Enhanced the process of heat and mass transfer; Therefore, it can be dried in a relatively short period of time. Enters from one end of the bed, undergoes boiling drying for several seconds to minutes, and automatically flows out from the other end of the bed. This device generally operates under negative pressure.

Application:

Drying operations for pharmaceuticals, chemical raw materials, food, grain processing, and feed. Like; Drying and dehumidification of raw materials, tablet granules, traditional Chinese medicine granules, health foods, beverage granules, corn germ, feed, plastic resins, citric acid, and other powdery materials. The applicable material particle size is generally 0.1-6mm, with a preferred particle size of 0.5-3mm.