{pboot:sort scode=4}

1. After opening the box, carefully check whether the equipment has been damaged during transportation. Then, place the electrical control devices of the high-speed machine and auxiliary equipment in place, and connect the pipeline of the main and auxiliary equipment. When assembling each pipeline flange, apply "Iron Anchor 609" liquid sealant with sealing components to ensure the sealing of the pipeline. At the same time, all individual machines and pipeline flanges are connected with grounding wires and grounded to avoid dust explosions caused by static sparks.

2. Before the trial operation of each individual machine, it is necessary to check whether there are any metal objects inside the machine, and if so, eliminate them. Whether the bolts are firm, the tightness of the belt, the reliability of the protective cover, and so on.

3. Start each motor steadily in the following order, close the air door to start, crusher ->dust collector ->grading device ->screw feeder ->open the air door ->close the air door.

4. After running empty for five minutes, the operator should carefully observe various instruments on the control cabinet and wait for the no-load current to stabilize before feeding. After feeding, it is not allowed for the current to exceed the rated value of 32.6A. Otherwise, the feeding amount should be reduced to ensure normal operation and timed operation of the discharge motor.

5. You can stop the machine in the following order

Spiral feeder ->After running for five minutes, the main crushing machine, dust collector, classifier ->air shutter can be stopped simultaneously.

6. By operating the continuously variable transmission handle of the grading device, the speed of the grading wheel can be changed, while achieving excellent adjustment of the product. If fine particle size is required for the product, the rotational speed can be increased, otherwise reducing the rotational speed will increase the particle size.