{pboot:sort scode=4}

After long-term use, there will be a lot of residual substances in the Chinese herbal medicine grinder. If not cleaned, it will cause the equipment to run poorly or reduce its efficiency. Therefore, it is necessary to clean the Chinese herbal medicine grinder at regular intervals. So, how to clean the Chinese herbal medicine grinder?

Two cleaning methods:

1. Cleaning of other parts of the crusher: mainly cleaning the crusher cover and the parts with screws on the outside. These areas can be gently brushed clean with a brush, and if necessary, cleaned with water or detergent.

2. Cleaning of the shredder compartment. The shredder compartment, also known as the crushing bin, is the key area for cleaning as all items are crushed in the crushing bin. The main fixed parts of the crusher compartment and motor are located at the blade head inside the engine compartment. The blade head is fixed by a stainless steel screw. Simply loosen the screw with a wrench and remove the blade to separate the engine compartment from the motor. When separating, be sure to unplug the connecting wire. The cleaning tools for the crusher compartment involve specialized wrenches, brushes, etc., such as the Jiupin crusher, which is equipped with specialized wrenches for easy disassembly of the blade head.

The traditional Chinese medicine grinder is suitable for small traditional Chinese medicine factories, shops, and hospitals, as well as chemical, mining, and scientific research units. The machine has high work efficiency and simple operation. The product has a fineness of up to 200 mesh, which is more effective for crushing valuable traditional Chinese medicines that are prone to sticking and difficult to crush with conventional crushers. When using a traditional Chinese medicine grinder, the following issues should be noted:

1. Check if there are any foreign objects in the crushing chamber (it must be empty before starting up), and turn on the power.

2. Tighten the butterfly nuts on the upper cover and crushing chamber.

3. Start the motor and rotate it empty for 1-2 minutes, then gradually feed the material from the feeding tray. The feeding should not be too fast or too much.

4. If the material gets stuck and the motor does not rotate, please turn it off immediately to prevent the motor from burning out. After removing the stuck material, it can continue to be used.

5. It is strictly prohibited to open the upper cover and insert hands into the crushing chamber during the use of this machine.

6. This machine is a dry crusher and is not suitable for crushing damp and greasy materials.

7. Please ask the user to replace different screens according to their needs.

8. This machine adopts an overheat protector. If the motor load is too high, it will automatically stop. If you continue to operate, please press the protector again.

9. During the operation of this machine, the current should not exceed 15 amperes.